M 200 Mono Power Amplifier
August 28, 2022
HA 200 Headphone Amplifier
August 28, 2022
Show all

DAC 200 D/A Converter


The DAC 200

The DAC 200 is the latest member of an extended family of High-End converters and pre-amplifiers. Every aspect of its design symbolises our uncompromising commitment to science and music. The ability to reproduce DSD 1024 files and its complete galvanic separation are just two highlights which underline the potential of the DAC 200 in impressive style. The DAC 200 is designed to convert a large number of digital formats into natural-sounding analogue signals, and to pass them on via the integral headphone or analogue outputs.

Categories: , .

Analogue section

  • Frequency response + 0 / − 3 dB :0,1 Hz – 200 kHz
  • Signal / noise ratio :110/114 dB
  • THD  /  Intermodulation : < 0,001 % / < 0,001 %
  • Channel separation : > 108 dB
  • Pre-amplifier outputs : variable : High level (RCA) 0…2,5 Veff / 22 Ohms, balanced (XLR) 0…5,0 Veff / 22 Ohms | fixed :High level (RCA) 2,5 Veff / 22 Ohms, balanced (XLR) 5,0 Veff / 22 Ohms | discreetly designed Class A-HV-output stage in Double-Mono-Circuitry
  • Volume control : Gold contact relays controlled in 1 dB steps, – 90 dB to 0 dB
  • Headphone output : 4.4 mm Pentaconn, discreetly designed high performance output stage, Class A operation up to 200 mA, 6 Ohms output impedance

Analogue inputs

  • High level (RCA) : 250 mVeff … 4,5 Veff / 10 kOhms

Digital inputs

  • 1 x AES-EBU 32…192 kHz / 16-24 Bit
  • S/P-DIF: 2 x Standard Coax, 2 x optical TOS-Link 32…192 kHz / 16-24 Bit and DoP DSD64 (0x05/0xFA Marker)
  • 1 x BNC 32…192 kHz / 16-24 Bit
  • 2 x USB DAC: Device-Mode 44,1 … 768 kSps (PCM) and up to DSD1024*, supports asynchronous data transfer. *DSD 512 and DSD 1024 with Windows PC and appropriate driver installed or Linux PC with Kernel 4.4 or higher only.
  • Supports DoP up to DSD 256 (0x05/0xFA Marker) : 2 x HDMI IN, 1 x HDMI OUT with ARC (as an option)

D/A converter section

  • CM : Double-Differential-Quadruple-Converter with four 32-Bit Sigma-Delta | D/A converter per channel, 705,6 / 768 kSps conversion rate
  • DSD : T+A-True-1Bit DSD D/A converter, up to DSD 1024 (49,2 MHz), native bitstream
  • Upsampling : T+A signal-processor – synchronous upsampling with four selectable oversampling algorithms. FIR short, FIR long, Bezier/IIR, Bezier, NOS (non-oversampling)
  • Analogue filter : Phase-linear Bessel filter 3rd order, switchable with 60 or 120 kHz cut off frequency

Mains / Accessories / Dimensions

  • Mains : 200 – 240 V, 50 – 60 Hz, 30 Watts
    Standby : < 0,5 Watts
    Dimensions (H × W× D) : 10 × 32 × 34 cm, 4 x 12.6 x 13.4 inch
    Accessories : Remote control FM200, power cord, USB cable
    Weight : 6,2 kg, 13.7 lbs
    Finishes : Alu silver anodized (43), Alu schwarz anodized (42) | Technical modifications reserved

Related Products